Installation of Colloid Mill Machine
Colloid mill is divided into two types: vertical colloid mill machine and horizontal colloid mill machine. The use of colloid mill combines many kinds of mechanical properties such as homogenizer, ball mill, three roll mill, blender and so on. The efficiency of colloid mill machine is several times that of the above machine. Users need a lot of attention when installing the machine. Listed below:
Precautions for colloid mill machine installation:
1. The equipment should be installed on the flat concrete foundation and fixed with the ground screw (which is not fixed according to the gel grinding work).
2. Check whether the fastening screws are tightened (the rotor center screw is M12 left screw).
3. Use a special trigger to turn the rotor with a special trigger to check whether contact with the stator and whether or not the card is dead. If there is any such situation, the machine should not be turned on.
4. Check and connect the power cord (three-phase alternating current, voltage is 380 volts, body protection grounding) and note that the rotor rotation direction should be aligned with the arrow on the base.
5. Connect the cooling water and notice the water entry and exit signs of the nozzle.
6. When starting the motor, first click the switch to check for noise and vibration. If the situation is abnormal, it should stop immediately and try again after troubleshooting.
The colloid mill machine is suitable for using in food, medicine, chemical industry, chemical industry, light industrial plastics and other industries. It has the advantages of superfine grinding, dispersing, emulsifying, homogenizing and mixing. After the material is processed by this colloid mill machine, the particle size can reach 2-60 microns, and the homogeneity can reach more than 95%. It is an ideal equipment for ultra-micro machining.
If you want to know more about the installation of colloid mill machine, price, pictures, just contact us or leave your message.
The colloid mill machine is suitable for using in food, medicine, chemical industry, chemical industry, light industrial plastics and other industries. It has the advantages of superfine grinding, dispersing, emulsifying, homogenizing and mixing. After the material is processed by this colloid mill machine, the particle size can reach 2-60 microns, and the homogeneity can reach more than 95%. It is an ideal equipment for ultra-micro machining.
If you want to know more about the installation of colloid mill machine, price, pictures, just contact us or leave your message.
Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505
Message