After a period of use, the peanut stone removing machine will have varying degrees of wear and tear, for the normal use of equipment, after use for a period of time, we need timely maintenance of the equipment.

Peanut stone removing machine maintenance and repair:

① regular inspection of the various parts to the stone machine is normal, the peanut picks the various components of the regular inspection, if the natural wear and tear of the parts to be replaced, in order to promptly eliminate the machine a variety of security risks and extend peanut pod Machine life.

② on time for the stone machine equipment system filling oil, so that it can effectively reduce the degree of wear and tear of the machine, and clean the soil after working parts, coated with butter or waste oil, so as to avoid rust, paint stripping if the place should be re- Painted.

③ Stoning machine rubber or plastic feeding tube, fat pipe should be removed and wiped clean bundled, loaded into the box or shelves. Can be poured into the sand or into the hay, etc., to avoid extrusion, folding deformation.

④ but also check the condition of the diesel engine running good or bad; check the motor is not functioning more normal, the power cord is not a leakage phenomenon. Also remember to turn the various components to see if their installation protection is in place.

In addition, the peanut stone removing machine, the entire operation should be stored at the end of storage, if the stripping, rust rust paint spray protection is required, no rain and sun, in order to prolong life. In order to make the equipment to better work for us, we must be in the process of using the equipment to do routine maintenance work.