Types of colloid mill for nut butter: vertical colloidal mill and horizontal two specifications. The unit can be choosed according to the characteristics of different materials, production efficiency and different uses, and choose different sizes of colloid mills to achieve good nut butter grinding results.

 

The structure features of horizontal colloid mill are: low height and high vertical. The horizontal position should be considered in the axial direction of the motor in order to prevent the axis of the motor shaft from touching the tooth. The bearing can be covered in the front of the motor, because the axial thermal expansion of the rotor and shaft of the motor will move in the direction of the rear motor bearing with the front bearing key of the motor, in order to reduce the impact on the clearance of the grinding head.

 

The structure features of vertical colloid mill are: because of the vertical installation of motor, the motor rotor's self weight will not cause axial movement of motor shaft, so it can not consider axial positioning. The horizontal installation of colloid mill, such as the outlet of the material, should set the discharge valve below the outlet to put out the material in the colloid mill for a long time. The design of antifouling disc should consider the reflux of the self weight of the waste material, and it is not used vertically. The transmission efficiency of the two colloid mills is close to the score type.