Black Gram Peeling Splitting Machine
Material: black gram
Capacity: 400-600kg/h
Loading Port: Qingdao Port
Description: The black gram peeling machine adopt dry peeling method and it is suitable for peeling soybean, black gram, pea and broad bean etc.
Product Features
This black gram peeling splitting machine is suitable for process beans with a diameter of less than 25 mm, such as black gram, broad bean, soya bean and pea etc.. It has two functions of peeling and splitting, and also has high peeling rate and reliable quality.
Application of Black Gram Peeling Machine
Black gram peeling machine is an ideal equipment to improve the flavor, bean product grade; widely used in food processing plants, hotels, canteens, and other specialist, is the most popular equipment for peeling beans for the majority of users.
Black gram peeling machine is an ideal equipment to improve the flavor, bean product grade; widely used in food processing plants, hotels, canteens, and other specialist, is the most popular equipment for peeling beans for the majority of users.
Working Principle of Black Gram Splitting Machine
Under the action of the mill, the skin will be removed from the beans (the humidity of the bean grain is <10%-13%). The mixture of skin and kernels into the filter and remove some powder. Then the fan can suck the skins to complete the separation of the skin and kernel.
Use and Maintenance of Black Gram Peeling Splitting Machine
1. Before the operation of the machine, check whether there is any impurity in the machine, make sure that it can start correctly, turn to clockwise, and cut off after normal operation. When stopping, the beans should be removed, so that it can be easily started next time.
2. Adjust the gap: the spindle locking nut with a hammer (pine nut tapping on 10 mm screws) make a tight locking nut loosening in the disc rotating disc, clockwise turn gap increased, whereas reduced, adjusted.
3. Under the friction disc required between the distance, and then the locking nut you can.
3. Under the friction disc required between the distance, and then the locking nut you can.
4. The air quantity regulating gate is installed on the feed pipe of the kernel shell separator, and the air volume can be adjusted according to the needs.
5. The shell of the machine is connected with the motor. In order to prevent the leakage of the motor, the grounding wire should be installed in the shell of the body in order to prevent the electrification of the shell. Regular repair and maintenance work, usually three months for one.
