Automatic Sunflower Seeds Huller Peeling Machine 1200 KG / H
Material: Sunflower seeds
Capacity: 1000-1200 kg per hour
Loading Port: Qingdao Port
Description: Fully automated, high hulling rate, small kernel breakage, suitable for sunflower seeds, hemp kernels, etc.
Product Features
The sunflower seeds huller machine can complete the removal of impurities, hulling, peeling, sorting and re-selection of sunflower seeds at one time. It is fully automated with high dehulling rate and small kernel breakage. This machine is widely used in sunflower oil and sunflower snack processing plants.
Standard Sunflower Seeds Peeling Machine Configuration:
Loading hopper, bucket elevator, double hulling mainframe, three reselectors, suction and return device, receiving hopper, control cabinet.
Structure Advantages of Sunflower Seeds Huller Machine
Working Video of Automatic Sunflower Seeds Peeler Machine
Environmental conditions for using sunflower seeds huller:
Related Product: Sunflower Seeds Roaster Machine
Structure Advantages of Sunflower Seeds Huller Machine
- The setting of double sheller greatly improves the shelling efficiency, and the output can reach 1200 kg per hour.
- Frequency conversion technology achieves separate control of the sheller.
- The unique wind-feeding system makes the unhulled grains automatically enter the next shelling cycle, which improves the shelling rate.
- By adjusting the tilt angle of the screen body, the ideal sorting effect is achieved.
- Multi-functional impurity remover can remove large impurities, small impurities, light impurities and other impurities in raw materials.
- The use of a spiral unloader facilitates the collection of sunflower peels and reduces the generation of dust.
- The equipment is centrally controlled by the electric control cabinet, and the operation is simple and intuitive.
Working Video of Automatic Sunflower Seeds Peeler Machine
Environmental conditions for using sunflower seeds huller:
- Must be equipped with a 380 volt three-phase power supply, with voltage fluctuations not exceeding ± 10% of the rated value.
- The room temperature is between -10 ° ~ 40 ° C. If the room temperature is lower than -10 ° C, the inverter may be damaged and the motor may not start normally.
- The ground in the factory building is flat, clean and free of obstacles.
