Attention to the use of a black gram peeler machine:

(1) during commissioning, all transmission parts are filled with lubricating oil, with special attention to ensure bearing position and vibrating motor. Carefully check whether there is a card or collision phenomenon, pay special attention to whether there are iron, screws and hard objects between the peeling rolls, and ask for manual peeling roller movement freely. Then, connect the power adjustment direction. According to the (suction tube fan) screening, peeling machine, roller feeding order starting, separation of hull and kernel (shutdown otherwise). After 30 minutes of air test, carefully check each bearing position, motor drive position and no abnormal voice, then you can put a small amount of material into trial run.

(2) according to the technical requirements of the peeling raw material or production process, the clearance between the peeling rollers can be adjusted by downtime. In general, the peeling of soybean is 2.5-3.5mm. Replacement of different aperture sieve separation of hull and kernel meet the technique requirements of the best.

(3), no material is allowed to start or shut down. If suddenly stopped, it is necessary to remove the material by manual peeling roller and turn it on freely.

(4), in normal production, according to the production time, regular inspection of the transmission parts to ensure the normal oil level, fasteners, when overhauled, the bearing cover can be opened, with gasoline cleaning bearings after the filling of butter.

(5) the vibration motor, the motor seat and the drive shaft must be locked with double nuts so as to avoid the vibration of the motor, which causes the vibration motor to oscillate and cause the transmission shaft to break.

(6) for the convenience of the user, for the vulnerable parts, all kinds of material sifter clothing, all have the stock, and have wire drawing equipment, no matter the user comes to the letter to deal with the business, the company wholeheartedly service.